Machine Components Corporation
Machine Components Corporation
70 Newtown Road, Plainview, NY 11803-4382
Phone: 516.694.7222
Email: info@machinecomp.com
Print Back
Features
  • Long life under continuous slip conditions
  • Unidirectional or bidirectional operation
  • Same or different CW and CCW torques
  • Precise and stable limit torque calibration
  • Range: 1.0 to 600 oz·in
  • Same torque at breakaway as at high slip velocities
  • Slot for pin coupling
  • Corrosion resistant materials
Applications
  • Drag torques for supply reels
  • Safe holding of backdriving loads
  • Friction loading of mechanism
  • Friction loads for testing components
Federal supply code - 15531
Spring Wrapped Drag Brake
Spring Wrapped Drag Brake - Dimensions
Unit of Measure
Items Spring Wrapped Drag Brake
CO-B-201
Spring Wrapped Drag Brake – CO-B Series 		Spring Wrapped Drag Brake
CO-B-202
Spring Wrapped Drag Brake – CO-B Series 		Spring Wrapped Drag Brake
CO-B-301
Spring Wrapped Drag Brake – CO-B Series 		Spring Wrapped Drag Brake
CO-B-302
Spring Wrapped Drag Brake – CO-B Series 		Spring Wrapped Drag Brake
CO-B-303
Spring Wrapped Drag Brake – CO-B Series
Upper Limit Torque (oz·in)1 N/A 9 ± 2 N/A 9 ± 2 N/A 20 ± 2 N/A 20 ± 2 N/A 20 ± 2
Unit Weight N/A 0.9 oz N/A 0.9 oz N/A 2.4 oz N/A 2.4 oz N/A 2.4 oz
A (in) N/A .9300 N/A .9300 N/A 1.24 N/A 1.24 N/A 1.24
B (in) N/A .1800 N/A .1800 N/A .2100 N/A .2100 N/A .2100
C + .0010 (in) N/A .1250 N/A .1875 N/A .1875 N/A .2500 N/A .3125
D (in) N/A .57 N/A .57 N/A .94 N/A .94 N/A .94
E (in) N/A .10
F (in) N/A .29 N/A .29 N/A .44 N/A .44 N/A .55
G N/A #2-56 N/A #2-56 N/A #4-40 N/A #4-40 N/A #4-40
H (in) N/A .38 N/A .38 N/A .50 N/A .50 N/A .50
J Max. (in) N/A .45 N/A .33 N/A .68 N/A .68 N/A .68
K - .0010 (in) N/A .093 N/A .093 N/A .125 N/A .125 N/A .125
L (in) N/A .63 N/A .63 N/A 1.0 N/A 1.0 N/A 1.0
  • 1 Stock units are calibrated with equal CW and CCW slip torques corresponding to the value of the Upper Limit Torques listed in the table above. Brakes can also be calibrated with slip torque values lower than the maximum values shown. When ordering, the CW and CCW slip torque values may be specified anywhere from the full torque value listed, to a lower value of approximately 1/8 of this maximum, and may be be specified the same or different for each of the two directions of rotation.