Features
- Long life under continuous slip conditions
- Unidirectional or bidirectional operation
- Same of different CW and CCW torques
- Precise and stable limit torque calibration
- Range: 1/2 to 600 oz·in
- Same torque at breakaway as at high slip velocities
- Jaw clamp mounting
- Corrosion resistant materials
- Tension control of film or tape drives
- Transmission overload protection
- Friction loads for testing components
- Coupling is slipped over one shaft and applicable screw tightened
- Second shaft is inserted into other end of coupling
- Pull loose end of coupling back about 0.02 inches and tighten applicable screw.
Model No. |
Upper Limit Torque (oz·in) |
A ± .02 (in) |
C + .0010 (in) |
D ± .03 (in) |
E ± .02 (in) |
---|---|---|---|---|---|
![]() | |||||
CL-14 | N/A 5 ± .7 | N/A .5000 | N/A .0940 .1250 | N/A .96 | N/A .50 |
CL-15 | N/A 8 ± 1 | N/A .6200 | N/A .1250 .1560 .1875 .2500 | N/A 1.05 | N/A .62 |
CL-16 | N/A 12 ± 1.2 | N/A .7500 | N/A .1250 .1560 .1875 .2500 | N/A 1.13 | N/A .62 |
CL-18 | N/A 20 ± 2 | N/A 1.0000 | N/A .1250 .1560 .1875 .2500 | N/A 1.28 | N/A .62 |
CL-210 | N/A 48 ± 5 | N/A 1.25 | N/A .1875 .2500 .3125 .3750 | N/A 1.43 | N/A 1.00 |
CL-212 | N/A 68 ± 7 | N/A 1.50 | N/A .3125 .3750 .5000 | N/A 1.59 | N/A 1.00 |
CL-312 | N/A 88 ± 9 | N/A 1.50 | N/A .3125 .3750 .5000 | N/A 1.59 | N/A 1.00 |
CL-315 | N/A 120 ± 12 | N/A 1.87 | N/A .3750 .5000 .6250 | N/A 1.84 | N/A 1.25 |
CL-418 | N/A 240 ± 24 | N/A 2.25 | N/A .3750 .5000 .6250 .7500 | N/A 2.31 | N/A 1.75 |
CL-521 | N/A 360 ± 36 | N/A 2.63 | N/A .3750 .5000 .6250 .7500 | N/A 2.31 | N/A 1.75 |
CL-524 | N/A 480 ± 50 | N/A 3.00 | N/A .6250 .7500 .8750 1.000 | N/A 2.25 | N/A 3.00 |