Features

• Long life under continuous slip conditions
• Unidirectional or bidirectional operation
• Same of different CW and CCW torques
• Precise and stable limit torque calibration
• Range: 1/2 to 600 oz·in
• Same torque at breakaway as at high slip velocities
• Corrosion resistant materials

• Tension control of film or tape drives
• Transmission overload protection
• Friction loads for testing components

1. Coupling is slipped over one shaft and applicable screw tightened
2. Second shaft is inserted into other end of coupling
3. Pull loose end of coupling back about 0.02 inches and tighten applicable screw.

Features

• Long life under continuous slip conditions
• Unidirectional or bidirectional operation
• Same of different CW and CCW torques
• Precise and stable limit torque calibration
• Range: 1/2 to 600 oz·in
• Same torque at breakaway as at high slip velocities
• Jaw clamp mounting
• Corrosion resistant materials

• Tension control of film or tape drives
• Transmission overload protection
• Friction loads for testing components

1. Coupling is slipped over one shaft and applicable screw tightened
2. Second shaft is inserted into other end of coupling
3. Pull loose end of coupling back about 0.02 inches and tighten applicable screw.

Features

• Bidirectional operation
• Constancy of limit torque

• Tension control of film or tape drives
• Transmission overload protection

Features

• High torque transmission
• Low drag overrunning
• Available for CW and CCW rotation

• Automatic flywheel decoupling
• Unidirection stepping
• Backstopping

Features

• Torque capacity up to 40 lb·in
• Long life under continuous slip conditions at 15 Watts
• Same or different CW and CCW torques
• Precise and stable limit torque calibration
• Same torque at breakaway as at slip velocities
• Corrosion resistant materials

• Tension control of film, tape or web drives
• Transmission overload protection
• Friction loads for testing components

1. Loosen the 4 #10 Socket Head clamping screws.
2. Slip coupling over shaft making sure that the length of insertion does not exceed the "E" or "F" dimensions. Tighten the first two clamping screws.
3. Insert second shaft into other end of coupling making sure that the length of insertion does not exceed the "E" or "F" dimensions. Tighten these two clamping screws.

Features

• Accommodates parallel and angular shaft misalignment
• Torsionally rigid
• Speeds to 2000 rpm
• Standard lengths up to 6"
• Zero radial play
• Zero axial play
• Clamp type hubs. No flats required on shafts
• One piece assembly, no loose parts to assemble or adjust
• Couples shafts with like or unlike diameters
• Bidirectional
• Low cost

• Business machines
• Computer peripherals
• Printing equipment
• Packaging machinery
• Instrument drives
• Servo mechanisms

Features

• No angular windup upon torque application
• Bidirectional operation
• Constancy of limit torque
• Long life under continuous slip conditions
• Same or different CW and CCW torques
• Corrosion resistant materials
• Torques from 10 to 110 oz·in
• Range of bores up 3/8" diameter

• Anti backlash gear boxes
• Precision microscope drives