• Spring Wrapped Jaw Clamp Slip Coupling – CL Series
  • Spring Wrapped Jaw Clamp Slip Coupling – CL Series - Dimensions
Features
  • Long life under continuous slip conditions
  • Unidirectional or bidirectional operation
  • Same of different CW and CCW torques
  • Precise and stable limit torque calibration
  • Range: 1/2 to 600 oz·in
  • Same torque at breakaway as at high slip velocities
  • Jaw clamp mounting
  • Corrosion resistant materials
Applications
  • Tension control of film or tape drives
  • Transmission overload protection
  • Friction loads for testing components
Recommended Mounting Procedure
  1. Coupling is slipped over one shaft and applicable screw tightened
  2. Second shaft is inserted into other end of coupling
  3. Pull loose end of coupling back about 0.02 inches and tighten applicable screw.
Federal supply code - 15531
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Model No.

Upper Limit Torque (oz·in)

A ± .02 (in)

C + .0010 (in)

D ± .03 (in)

E ± .02 (in)

N/A 5 ± .7 N/A .5000 N/A .0940 .1250 N/A .96 N/A .50
N/A 8 ± 1 N/A .6200 N/A .1250 .1560 .1875 .2500 N/A 1.05 N/A .62
N/A 12 ± 1.2 N/A .7500 N/A .1250 .1560 .1875 .2500 N/A 1.13 N/A .62
N/A 20 ± 2 N/A 1.0000 N/A .1250 .1560 .1875 .2500 N/A 1.28 N/A .62
N/A 48 ± 5 N/A 1.25 N/A .1875 .2500 .3125 .3750 N/A 1.43 N/A 1.00
N/A 68 ± 7 N/A 1.50 N/A .3125 .3750 .5000 N/A 1.59 N/A 1.00
N/A 88 ± 9 N/A 1.50 N/A .3125 .3750 .5000 N/A 1.59 N/A 1.00
N/A 120 ± 12 N/A 1.87 N/A .3750 .5000 .6250 N/A 1.84 N/A 1.25
N/A 240 ± 24 N/A 2.25 N/A .3750 .5000 .6250 .7500 N/A 2.31 N/A 1.75
N/A 360 ± 36 N/A 2.63 N/A .3750 .5000 .6250 .7500 N/A 2.31 N/A 1.75
N/A 480 ± 50 N/A 3.00 N/A .6250 .7500 .8750 1.000 N/A 2.25 N/A 3.00
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1