Machine Components Corp. - Spring Wrapped Jaw Clamp Slip Coupling – CL Series - Compare Items

Features

Long life under continuous slip conditions
Unidirectional or bidirectional operation
Same of different CW and CCW torques
Precise and stable limit torque calibration
Range: 1/2 to 600 oz·in
Same torque at breakaway as at high slip velocities
Jaw clamp mounting
Corrosion resistant materials

Applications

Tension control of film or tape drives
Transmission overload protection
Friction loads for testing components

Recommended Mounting Procedure

Coupling is slipped over one shaft and applicable screw tightened
Second shaft is inserted into other end of coupling
Pull loose end of coupling back about 0.02 inches and tighten applicable screw.

Federal supply code - 15531

Request Information

Unit of Measure

Items	CL-14 Spring Wrapped Jaw Clamp Slip Coupling – CL Series	CL-15 Spring Wrapped Jaw Clamp Slip Coupling – CL Series	CL-16 Spring Wrapped Jaw Clamp Slip Coupling – CL Series	CL-18 Spring Wrapped Jaw Clamp Slip Coupling – CL Series	CL-210 Spring Wrapped Jaw Clamp Slip Coupling – CL Series
Upper Limit Torque (oz·in)¹	N/A 5 ± .7	N/A 8 ± 1	N/A 12 ± 1.2	N/A 20 ± 2	N/A 48 ± 5
Unit Weight	N/A 0.6 oz	N/A 0.9 oz	N/A 1.2 oz	N/A 2.6 oz	N/A 3.8 oz
A ± .02 (in)	N/A .5000	N/A .6200	N/A .7500	N/A 1.0000	N/A 1.25
C + .0010 (in)	N/A .0940 .1250	N/A .1250 .1560 .1875 .2500	N/A .1250 .1560 .1875 .2500	N/A .1250 .1560 .1875 .2500	N/A .1875 .2500 .3125 .3750
D ± .03 (in)	N/A .96	N/A 1.05	N/A 1.13	N/A 1.28	N/A 1.43
E ± .02 (in)	N/A .50	N/A .62	N/A .62	N/A .62	N/A 1.00
F (in)	N/A .45	N/A .48	N/A .51	N/A .58	N/A .62
G ± .02 (in)	N/A .20	N/A .20	N/A .20	N/A .20	N/A .25
¹ Stock units are calibrated with equal cw and ccw slip torques corresponding to the tabulated Upper Limit Torques. Other torques are readily availabe from full, down to 1/8 of the upper limit torque for each model. Torque values are independent of each other for cw and ccw rotation, and may be specified the same or different for the two directions.