Machine Components Corporation
Machine Components Corporation
70 Newtown Road, Plainview, NY 11803-4382
Phone: 516.694.7222
Email: info@machinecomp.com
Print Back
Features
  • Long life under continuous slip conditions
  • Unidirectional or bidirectional operation
  • Same of different CW and CCW torques
  • Precise and stable limit torque calibration
  • Range: 1/2 to 600 oz·in
  • Same torque at breakaway as at high slip velocities
  • Jaw clamp mounting
  • Corrosion resistant materials
Applications
  • Tension control of film or tape drives
  • Transmission overload protection
  • Friction loads for testing components
Recommended Mounting Procedure
  1. Coupling is slipped over one shaft and applicable screw tightened
  2. Second shaft is inserted into other end of coupling
  3. Pull loose end of coupling back about 0.02 inches and tighten applicable screw.
Federal supply code - 15531
Spring Wrapped Jaw Clamp Slip Coupling – CL Series
Spring Wrapped Jaw Clamp Slip Coupling – CL Series - Dimensions
Unit of Measure
1 

Model No.

Upper Limit Torque (oz·in)

A ± .02 (in)

C + .0010 (in)

D ± .03 (in)

E ± .02 (in)

CL-14 N/A 5 ± .7 N/A .5000 N/A .0940 .1250 N/A .96 N/A .50
CL-15 N/A 8 ± 1 N/A .6200 N/A .1250 .1560 .1875 .2500 N/A 1.05 N/A .62
CL-16 N/A 12 ± 1.2 N/A .7500 N/A .1250 .1560 .1875 .2500 N/A 1.13 N/A .62
CL-18 N/A 20 ± 2 N/A 1.0000 N/A .1250 .1560 .1875 .2500 N/A 1.28 N/A .62
CL-210 N/A 48 ± 5 N/A 1.25 N/A .1875 .2500 .3125 .3750 N/A 1.43 N/A 1.00
CL-212 N/A 68 ± 7 N/A 1.50 N/A .3125 .3750 .5000 N/A 1.59 N/A 1.00
CL-312 N/A 88 ± 9 N/A 1.50 N/A .3125 .3750 .5000 N/A 1.59 N/A 1.00
CL-315 N/A 120 ± 12 N/A 1.87 N/A .3750 .5000 .6250 N/A 1.84 N/A 1.25
CL-418 N/A 240 ± 24 N/A 2.25 N/A .3750 .5000 .6250 .7500 N/A 2.31 N/A 1.75
CL-521 N/A 360 ± 36 N/A 2.63 N/A .3750 .5000 .6250 .7500 N/A 2.31 N/A 1.75
CL-524 N/A 480 ± 50 N/A 3.00 N/A .6250 .7500 .8750 1.000 N/A 2.25 N/A 3.00
Unit of Measure
1